Receiver Setup: Tools; Setting Descriptions - Leica GR30 Online Help Manual

Tab option
Tools
Firmware management
Option management
Language management
Receiver settings backup

Receiver setup: Tools

Setting Descriptions

The table below describes the fields in the Tools tab.
Action
Power down
Reboot
Format
Format receiver settings
Description
Power down and reboot the receiver, format the SD card, initialise the ephemeris and
almanac, reset and store the receiver settings, stop the external USB storage device
and reset the all-time high and low internal temperature values.
Load and delete firmware files.
Load or delete options on the receiver. This page lists all purchased options that are
currently installed on the receiver.
Upload language files from the computer to the receiver and select which language
should be used.
Backup and upload receiver settings.
Icon Description
Press to power down the receiver. After power down, the web interface
will redirect to the Leica Geosystems GR/GM receiver web site.
Press to reboot the receiver. After reboot, you will be redirected to the
Web interface login page.
Select SD card to delete the complete SD card content including all data
stored for each logging session.
The GR10/30 & GM10/30 do not support the use
of external USB drives and only allow the option
to format the SD card.
Select External USB drive to delete the complete USB drive content
including all data stored for each logging session that is configured to
push data to this drive.
Select from the list box:
•
Reset all: Press to reset all receiver settings to their default
values. This includes all communication settings. Remote
access to the receiver might not be possible after the reset.
When the receiver settings are reset, all logging sessions and
data streams are deleted.
View the default settings.
•
Keep communication settings: Press to reset all receiver
settings except the communication settings. Always use this
setting when formatting the receiver settings for a remotely
controlled receiver.
The following receiver settings will not be overwritten
•
•
•
•
Spider and remote ports
Network connections - Ethernet
Network connections - Mobile Internet
Network connections - Bluetooth *
6: Context sensitive help
187