Leica GR30 Online Help Manual page 236

Open the Mount points tab.
4
5
Press the Create new mount point
On the New mount point page
6
•
Enter a unique mount point name
•
Enter the Data format of the stream transmitted via this mount point. This entry will appear in the
source table. That way the Ntrip clients can select the correct mount point for the data format they
need.
•
Enter tan Identifier for the mount point. This field can be left blank.
•
Enter the Navigation Systems for which correction data is streamed via this mount point.
•
Enable the Source password. An Ntrip server (source) connecting to this data stream to transmit
data will need to provide this password for authentication.
•
Enable Use client authentication if the Ntrip clients are to send user name and password before
being allowed to receive data from a mount point. User name and password are defined per mount
point, not per client. User name and password are therefore the same for all clients connecting to
the same mount point.
7
Press the Save
caster immediately. Check the event log for a confirmation that the connection was successful.
Ntrip server (source) setup
Step Description
Open the receiver's web interface in a browser window by typing in the receivers IP or hostname.
1
Go to the GNSS management / Data streams.
2
3
Press the Create new data stream
4
Select the Data stream type you wish to stream via the Ntrip protocol. Then press the Continue
5
Configure the data streams details and press the Continue
6
Select the Connection type, Ntrip server (source) in the Connection page and press the Continue
icon.
On the Configure NTRIP server (source) page
7
•
For Ntrip caster IP address enter the IP address of the Ntrip caster the data is to be streamed to.
•
In the TCP/IP port field enter the port at which the Ntrip source can access the mount point on the
Ntrip caster.
•
Enter the Mount point name and password for the mount point to stream data to.
•
If data is to be streamed to an Ntrip caster running on the same receiver as this data stream,
activate the Use local caster check box. This will automatically fill in the IP address and port fields
and hide them. It will also show a list of all mount points configured on the local Ntrip caster. Select
a mount point from the list or enter the mount point name manually. Mount points on the Ntrip
caster can still be created after the data stream has been set up.
Then press the Continue
8
Press the Save
caster immediately. Check the event log for a confirmation that the connection was successful.
Ntrip client setup
Step Description
Open the receiver's web interface in a browser window by typing in the receivers IP or hostname.
1
to open the mount points wizard.
button to store the data stream. The receiver will attempt a connection to the Ntrip
to open the data streams wizard.
icon.
button to store the data stream. The receiver will attempt a connection to the Ntirp
icon.
9: How to
icon.
211