1: Maintenance End Check; 2: Obtaining The New Firmware; 3: Copy Firmware File To The Sd Card - Leica GR30 Online Help Manual

1: Maintenance End Check

The firmware is protected and can only be loaded onto instruments with a valid firmware (software) Maintenance. To check the
Maintenance End date, open the Web Interface and go to the Status / Receiver Information page.
If the Maintenance End date shown is later than in the corresponding release notes, then this firmware can be loaded.
If the Maintenance End date is no longer valid, then please contact your local Leica Representative to learn about Customer Care
Packages (CCPs) that include software maintenance so that you can benefit from the latest software improvements.

2: Obtaining the new firmware

The firmware can be obtained in the following ways:
•
using the web link in the receiver's web interface on the Receiver Setup / Tools / Firmware management page. This link
copies the latest available firmware file to the computer.
•
using the MyWorld web portal: https://myworld.leica-geosystems.com/irj/portal
•
on a digital storage device from a local Leica Selling Unit or Dealer

3: Copy Firmware File to the SD Card

The firmware must be uploaded to the SD card before installation. The file can be uploaded via:
The Web Interface
Step Description
1 Go to the Receiver Setup / Tools / Firmware page.
2
Click the Upload new firmware file
Click the Browse... button and select the new firmware file.
3
4
Click the Upload
5 You will be directed back to the Firmware management page once the file upload is complete.
Using a FTP client
Step Description
1 Open an FTP client such as Windows Explorer or any other software capable of establishing an FTP
connection.
2 Enter the IP address (hostname) of the receiver and the username and password of a user with FTP server
read/write access.
3 Copy the firmware file into the Transfer / Firmware folder on the SD Card.
SD Card reader
Step Description
1 Insert the SD card into your PC or a SD Card reader.
2 Copy the firmware file into the Transfer / Firmware directory on the SD Card. This can be done with Windows
explorer or any other PC software.
3 Insert the SD card into the receiver and turn on the instrument.
button.
button to copy the file to the SD Card.
7: GR/GM Receiver Software
199