Setup Via Web Interface Over Ethernet And Dhcp - Leica SPIDER GR30 User Manual

6.2
Setup via web Inter-
face over Ethernet
and DHCP
50

Setup via Web Interface over Ethernet and DHCP

a
b
LAN
c
d
e
GR10_006
a GR30/GM30/GR50
b Local network (LAN)
c DHCP server
d Ethernet cable
e Computers with web interface
Step Description
1. Start the computer.
2. To connect the instrument to the local LAN supporting DHCP, plug an
Ethernet cable into the Ethernet port on the back of the GR30/
GM30/GR50.
3. Turn on the GR30/GM30/GR50.
4. Open a browser window on your computer.
5. Type "GR*******" into the browsers address field, where *******
is the serial number of the instrument. For example, GR1700001.
6. The web interface will now be accessible.
7. Use the default User name (Admin) and Password (12345678).
☞
After logging in the first time you must create a new user
account, including a new user name and password. The
default user account can then be deleted. Refer to the GR
Series Operational Manual (Online Help) for a step-by-step
guide.
8. Configure the GR30/GM30/GR50 for all required settings.
☞
Refer to the "GR/GM Series Operational Manual (Online Help)" for
further details on using the instruments web interface.
Equipment Setup