Leica GR30 Online Help Manual page 51

yellow
red
off
RT out data
stream LED green
red
off
RT in data
stream LED
green
flashing green
yellow
red
off
Position LED
green
flashing green
yellow
red
off
Bluetooth LED
26
Active logging sessions are configured and Smart clean-up is deleting
data from all or some of the configured logging sessions.
OR
Active logging sessions are configured but no position is available.
Recommended user action: Check the
remaining space of the SD card and delete old
data if necessary. Check the tracking and
position status.
Active logging sessions are configured but the SD card is full or no
satellites are tracked.
Recommended user action: Check the SD
card and the tracking status.
No active data stream is configured or power is off.
One or more data streams are configured and active. Data is being
streamed.
Data streams are active but no data is streamed.
Recommended user action: Check that data
is tracked and a navigated position is
available. Check that the correct reference
position is entered.
No active real time in data stream or the sensor is turned off.
A real time in data stream is configured and active, data is received
and a
fixed position is available.
A real time in data stream is configured and active, data is received, a
DGPS
position is available.
A real time in data stream is configured and active, data is received
but no
fixed or DGPS position is available.
There is an active real time data stream available, but no data is
received (e.g.
connection to reference lost).
The instrument is switched off.
A navigated position is available.
The instrument is tracking satellites but no position is available.
An external oscillator is configured with the oscillator fallback option active.
No time signal was detected for more than 5 minutes from the external clock
or the antenna was disconnected for more than 5 minutes. The receiver is
now using the internal clock instead of the selected external oscillator.
No satellites are tracked and no navigated position is available.
No wireless signal (not configured or no connection established).