Leica GR30 Online Help Manual page 54

¦
¦----------- Site Config
¦ ¦------- Site code
¦ ¦------- Antenna type
¦ ¦------- Antenna height
¦
¦----------- Logging sessions
¦ ¦
¦ ¦------- Overveiw page
¦ ¦------- List of configured sessions
¦
¦----------- Data streams
¦ ¦
¦ ¦------- Overveiw page
¦ ¦------- Activate/Deactivate All
¦
¦----------- Network Config (Bluetooth receivers)
¦ ¦
¦ ¦
¦ ¦------- Ethernet
¦ ¦ ¦------- Hostname
¦ ¦ ¦------- DHCP
¦ ¦ ¦------- IP address
¦ ¦ ¦------- Subnet
¦ ¦ ¦------- Gateway
¦ ¦------- Bluetooth
¦
¦----------- Network Config (WLAN receivers)
¦ ¦
¦ ¦------- Ethernet
¦ ¦ ¦------- Hostname
¦ ¦ ¦------- DHCP
¦ ¦ ¦------- IP address
¦ ¦ ¦------- Subnet
¦ ¦ ¦------- Gateway
¦ ¦------- WLAN
¦ ¦------- WLAN radio
¦ ¦------- WLAN profiles
¦
¦----------- Maintenance
¦
¦
¦------- Format SD card
¦------- Format USB device
¦------- Format System
Select to edit site code, antenna type and antenna height.
Select to activate or deactivate configured logging
sessions. Use right and left buttons to activate or
deactivate a session.
Select to activate or deactivate all configured data streams.
Use right and left buttons to activate or deactivate all
sessions.
Edit the GR25/50 hostname. This is also the Bluetooth
name. Edit the Ethernet settings (DHCP on/off, IP address,
subnet mask, gateway) or enable/disable the Bluetooth
device.
Edit the GR25/50 hostname, the Ethernet settings (DHCP
on/off, IP address, subnet mask, gateway) or the WLAN
settings.
Format the receiver configuration, SD card or attached
USB storage device or stop the USB storage device to
remove. Initialize the ME. Use the up or down button to
switch between the maintenance functions.
4: User Interface
29