Leica GR30 Online Help Manual page 104

DNS servers
Data sent
Data received
MAC address
RSSI / Signal strength
WLAN profile
By default, the Ethernet connection is set as the default gateway. The default gateway can be changed to
the mobile Internet or WLAN connection (For all GR25 with a WLAN radio and the GRL120 WLAN option
installed). The configured connection used as the default gateway is displayed on top and shows (default
gateway) in the header.
If backup communication is enabled and a second gateway is available, this backup gateway is used when
the default gateway becomes unavailable. The backup gateway then shows (current) in the header.
TCP/IP over USB
Status
IP address
Subnet Mask
Data sent
Data received
Device name
DynDNS
Status
Service provider
Last IP update
Hostname
Registered IP address
Bluetooth
Status
Bluetooth name
IP address type
Subnet mask
Data sent
Data received
Device name
The IP addresses of the DNS servers that are used.
The amount of data sent out from this connection.
The amount of data received by this connection.
The MAC address of the receiver's WLAN device.
The signal strength of the active WLAN connection.
The displayed signal strength is an interpretation (No signal, verly low, low, good, very
good, excellent) of the RSSI (receiver signal strength indication) value for the active
network. The RSSI values are mapped as follows:
•
RSSI < -90 or WLAN network not seen at all => "No signal"
•
RSSI >= -90 and < -81 => "Very low"
•
RSSI >= -81 and < -71 => "Low"
•
RSSI >= -71 and < -67 => "Good"
•
RSSI >= -67 and < -57 => "Very good"
•
RSSI >= -57 => "Excellent"
For ad hoc connections an RSSI value cannot be provided.
Thus "Available" will be shown.
The name of the active WLAN connection.
Description
The status of the configured network connection, Connected or Disconnected.
The default IP address for accessing the web interface via a USB device.
The default subnet mask for the connection.
The amount of data sent out from this connection, in bytes.
The amount of data received by this connection, in bytes.
States that this USB connection is established via the USB host port.
Description
Indicates if updating the IP address of the receiver at the DynDNS service was
successful.
The DynDNS service provider configured.
The date and time when the IP address was last updated at the DynDNS service.
The hostname of the receiver that is registered with the DynDNS service.
The IP address sent to the DynDNS service. This IP address is used to access the
receiver when entering the URL in a browser window.
Description
The status of the configured bluetooth connection, Disabled, Enabled – awaiting
connection or Connected.
The name other devices will detect the GR25 Bluetooth device with. Equals the
configured hostname.
The default IP address for accessing the GR25 via the Bluetooth device.
The default subnet mask for the connection.
The amount of data sent out from this connection.
The amount of data received by this connection.
States that this connection is established via the Bluetooth local area network.
6: Context sensitive help
79