Step-By-Step; How To Use Wlan On The Gr25/50; Background Information - Leica GR30 Online Help Manual

Make sure the Bluetooth adapter on the PC is enabled and properly installed.

Step-by-Step

Step Description
Enable the Bluetooth adapter of the GR25/50 using either:
1
a. by using the web interface: Open the web interface and select Receiver Setup / Network
Connections and select Bluetooth
b. or by using the display and buttons: Go to Configuration / Network Config and then select
Bluetooth, make sure that Bluetooth is shown as "Enabled".
In Windows, go to the Start menu and select Control Panel / Network Connections.
2
In the Bluetooth Network Connection menu right click and select Properties.
3
Use the following IP address:
4
•
IP: 192.168.253.x e.g. 192.168.253.11
•
Subnet mask: 255.255.255.0
Click "OK"
Note: The last part of IP should be a number great than10 to avoid conflicts with other Bluetooth
devices.
Add the GR25/50 as new Bluetooth device. To do this either:
5
a. Right click the Bluetooth icon in the task bar and select "Join a Personal Area Network"
b. or go to Settings / Network Connections and select Bluetooth Network Connections
Select "Add..."
6
Tick the checkbox
7
Click on "Next"
Select the receiver you want to connect to from the list of Bluetooth devices
8
Click on "Next"
Enter the pairing code by selecting the option "Let me choose my own passkey"
9
Enter default pairing code "0000" or the custom code if already configured on the Bluetooth page of the GR25/50
web interface
Click on "Next"
Confirm the confirmation message and finalise the Bluetooth wizard.
10
Click on "Finish"
Select the GR25/50 within the list of paired Bluetooth devices.
11
Select "Connect".
The Bluetooth LED on the GR25/50 should now turn blue.
Open a browser and enter: 192.168.253.2, this will load the login page of the web interface.
12
Use the default Admin account or a custom account to log in.

How to use WLAN on the GR25/50

Background Information

When the WLAN adapter on the GR25/50 is enabled, two different modes can be configured.
216