YASKAWA E-V Series User Manual page 260

7 Utility Functions (Fn
(6) Operating Procedure
Follow the steps below to perform the program JOG operation.
Step
1
2
3
4
5
6
7-10
)
Display after
Keys
Operation
MODE/SET
MODE/SET
MODE/SET
MODE/SET
MODE/SET
（Blinking）
Press the MODE/SET Key to select the utility function mode.
DATA/
Press the UP or DOWN Key to select Fn004.
DATA/
Press the DATA/SHIFT Key for more than one second. The dis-
play shown on the left appears.
DATA/
Press the MODE/SET Key. The servo turns ON.
DATA/
Press the UP or DOWN Key according to the first movement
direction of the operation pattern. After the preset waiting time,
the movement starts.
Notes:
• Press the MODE/SET Key again during operation, and the ser-
vomotor will be in baseblock status and stop.
DATA/
• Press the DATA/SHIFT Key for more than one second during
operation, the servomotor stops and the display of step 2
appears.
"End" blinks when the program JOG operation movement com-
pletes, and the display of step 4 appears.
Notes:
• Press the MODE/SET Key, and the servomotor will be in base-
block status and the display of step 3 appears.
• Press the DATA/ENTER Key for more than one second, and
the display of step 2 appears.
Operation