YASKAWA E-V Series User Manual page 270

7 Utility Functions (Fn
(2) Operating Procedure
Follow the steps below to set
Setting values are as follows:
• 0000
"
• 0001
"
Step
1
2
3
4
5
6
7
8
7-20
)
write prohibited
"
: Write permitted (Releases write prohibited mode.)
"
: Write prohibited (Parameters become write prohibited from the next power ON.)
"
Display after
Operation
MODE/SET
MODE/SET
MODE/SET
MODE/SET
MODE/SET
Display blinks
MODE/SET
Turn OFF the power and then turn ON again to validate the setting.
or write permitted.
" "
Keys
Press the MODE/SET Key to select the utility function
mode.
DATA/
Press the UP or DOWN Key to select Fn010.
DATA/
Press the DATA/SHIFT Key for approximately one second.
The display shown on the left appears.
DATA/
Press the UP or DOWN Key to set a value:
"0000": Write permitted, "0001": Write prohibited
DATA/
Press the MODE/SET Key to register the value.
The write prohibited settings of parameters are executed.
When the value is registered, the display shown on the left
blinks for about one second.
Note:
DATA/
If a value other than "0000" and "0001" is set, "Error" is dis-
played.
The display changes from "donE" to "P.000 ."
Press the DATA/SHIFT Key for approximately one second.
"Fn010" is displayed again.
DATA/
"
Operation