YASKAWA E-V Series User Manual page 121

5 Operation
5.3.1 Basic Settings for Speed Control
(2) Setting Speed Reference Input Gain
Sets the analog voltage level for the speed reference (V-REF) necessary to operate the servomotor at the rated
speed.
Pn300
Rated motor speed
Factory setting
-12
5-18
Speed Reference Input Gain
Setting Range
150 to 3000 0.01 V/rated speed
-8 -4
4 8 12
Input voltage (V)
Rated motor speed
The slope is set in Pn300.
Setting Unit Factory Setting
600
Force
Speed Position
When Enabled
Immediately
Classification
Setup