7 Utility Functions (Fn
Step
5
6
7
8
7-14
)
Display after
Operation
MODE/SET
MODE/SET
MODE/SET
MODE/SET
Keys
Press the DATA/SHIFT Key for less than one second. Zero
adjustment data will be displayed as shown on the left.
DATA/
Press the UP or DOWN Key to change the data. This com-
pletes zero adjustment of the analog monitor output.
DATA/
Press the DATA/SHIFT Key for less than one second. The
zero adjustment data will be displayed as shown on the left.
To adjust a different channel, switch the monitor channel
using steps 4 through 6.
DATA/
Press the DATA/SHIFT Key for approximately one second.
"Fn00C" is displayed again.
DATA/
Operation