Suzuki Ignis Service Manual page 3582

REAR BRACKET BUSH
Inspect bush for wear or damage. Replace if necessary.
BRUSH
• Check brushes for wear.
Measure length of brushes and if below limit, replace brush.
Brush length
Standard 17.0 mm (0.67 in.)
Limit 11.5 mm (0.45 in.)
• Install brushes to each brush holder and check for smooth
movement.
SPRING
Inspect brush springs for wear, damage or other abnormal condi-
tions. Replace if necessary.
Brush spring tension
Standard
Limit
DRIVE LEVER
Inspect drive lever for wear. Replace if necessary.
CRANKING SYSTEM 6G-9
0.8 kW
12.3 mm (0.48 in.)
7.0 mm (0.28 in.)
0.8 kW
1.95 kg (4.3 lb) 2.2 kg (4.85 lb)
0.9 kg (1.98 lb) 0.6 kg (1.32 lb)
1.2 kW
1.2 kW