Table of Contents
Advertisement
6G-8 CRANKING SYSTEM
Starting Motor Inspection
PLUNGER
Inspect plunger for wear. Replace if necessary.
MAGNETIC SWITCH
Push in plunger and release it. The plunger should return quickly
to its original position. Replace if necessary.
Pull-in Coil Open Circuit Test
Check for continuity across magnetic switch 'S' terminal (1) and
'M' terminal (2). If no continuity, coil is open and should be
replaced.
Hold-in Coil Open Circuit Test
Check for continuity across magnetic switch 'S' terminal (1) and
coil case. If no continuity, coil is open and should be replaced.
Advertisement
Table of Contents
