6E1-24 ENGINE AND EMISSION CONTROL SYSTEM
2
3
3
1
Fuel injector removal and installation
REMOVAL
CAUTION:
A small amount of fuel may come out after removal of
fuel injectors, cover them with shop cloth.
1) Relieve fuel pressure according to procedure described in
"Fuel pressure relief procedure" of Section 6.
2) Disconnect battery negative cable at battery.
3) Disconnect MAF and IAT sensor connector, and detach
EVAP canister purge valve.
4) Remove air cleaner assembly with air intake pipe.
5) Disconnect fuel injector couplers.
6) Disconnect fuel feed hose from fuel delivery pipe (1).
7) Remove fuel delivery pipe bolts (2).
8) Remove fuel injector(s) (3).