Table of Contents
Advertisement
9A-174 Wiring Systems:
• Yazaki has a wedge or arrow shape, similar to that
shown.
Connector Position Assurance Locks
The connector position assurance (CPA) is a small
plastic insert that fits through the locking tabs of the
connector. CPAs are used in various connectors
throughout the vehicle. CPAs are also used in all SIR
system electrical connectors. The CPA ensures that the
connector halves cannot vibrate apart. You must have
the CPA in place in order to ensure good contact
between the mating terminals, of the connector.
Terminal Position Assurance Locks
The terminal position assurance (TPA) insert resembles
the plastic combs used in the control module connectors.
The TPA keeps the terminal securely seated in the
connector body. Do not remove the TPA from the
connector body unless you remove a terminal for
replacement.
AFL/EPC Connectors
Special tool
J-38125 Terminal Repair Kit
Removal Procedure
Follow the steps below in order to remove terminals from
the connector.
1. Locate the connector position assurance (CPA) on
the top of the wire dress cover. Slide the CPA
forward.
2. Slide the lever lock forward while pressing down on
the lever lock release tab.
Advertisement
Table of Contents
Troubleshooting
