Table of Contents
Advertisement
• JST connectors have JST in small letters on their
connectors, similar to that above. The location of the
logo will vary with the connector size and style.
• Kostel has an "LK" with a circle around it. These
connector are usually used as a transmissions
connection.
• Most Molex connectors will have the Molex logo on
the dresscover of the connector. In some cases the
connectors may have MX followed by another letter.
The third letter indicates where the connector was
made. A connector with MXD is a Molex connector
made in Detroit.
Sumitomo has a unique symbol on their connector
and possibly a part number. The symbol is similar to
that of a diamond lying on its side, similar to that
shown. The logo could appear anywhere but the most
common place is at the wire side of the housing.
• Tyco/AMP has many different and unique connector
designs. Some may or may not have identifiable
marks on them.
Wiring Systems:
9A-173
Advertisement
Table of Contents
Troubleshooting
