TCM terminal: 2S (+)2U (−)
•
Oscilloscope setting: 5 V/DIV (Y) 10 ms/DIV (X)
•
Measuring condition: P, N position, Idle
•
Shift solenoid C control
TCM terminal: 2V (+)2U (−)
•
Oscilloscope setting: 5 V/DIV (Y) 10 ms/DIV (X)
•
Measuring condition: P, N position, Idle
•
TCC solenoid control (TCC on)
TCM terminal: 2W (+)2M (−)
•
Oscilloscope setting: 5 V/DIV (Y) 5 ms/DIV (X)
•
Measuring condition: D range, TCC on (60 km/h {37 mph} or more)
•
TCC solenoid control (TCC off)
TCM terminal: 2W (+)2M (−)
•
(w)
RX-8 Transmission (Manual & Auto)
Page 59