Mazda RX-8 Manual page 1041

Hide thumbs Also See for RX-8:

Table of Contents

Inspect the eccentric shaft for oil leakage after removing the flywheel. If necessary, replace the

3. Remove the flywheel using the SST .

4. Remove the key from the eccentric shaft.

Flywheel Installation Note

1. Install the key to the eccentric shaft.

2. Align the flywheel key groove with the eccentric shaft key and install.

3. Install the SST to the flywheel.

4. Apply silicone sealant to the locknut thread.

RX-8 Transmission (Manual & Auto)

Troubleshooting