Mazda RX-8 Manual page 1058

Hide thumbs Also See for RX-8:

Table of Contents

Tightening torque

126.0    154.0 N·m

{12.9    15.7 kgf·m, 93.0    113 ft·lbf}

9. Verify again that dimension A is within the specification.

If it is not within the specification, adjust dimension A again.

Shift Lever Component Installation Note

1. Apply grease to the areas of the shift lever component as shown in the figure.

INSPECTION AFTER TRANSMISSION INSTALLATION

1. After warming up the engine, perform a road test and inspect the following items:

a. No abnormal noise in each shift position.

b. Smooth shift operation when shifting gears.

c. No gear slipout after shifting gears.

d. Back-up light switch operates correctly.

RX-8 Transmission (Manual & Auto)

Troubleshooting