Mazda RX-8 Manual page 955

Diagnostic procedure
STEP INSPECTION
VERIFY FREEZE FRAME DATA HAS
BEEN RECORDED
1
Has FREEZE FRAME DATA been
•
recorded?
VERIFY RELATED REPAIR
INFORMATION AVAILABILITY
Verify related Service Bulletins and/or
•
2
on-line repair information availability.
Is any related repair information
•
available?
VERIFY TROUBLESHOOTING OF P2136
COMPLETED
Make sure to reconnect all disconnected
•
connectors.
3
Clear the DTC from the PCM memory
•
using the WDS or equivalent.
Start the engine.
•
Is the same DTC present?
•
VERIFY AFTER REPAIR PROCEDURE
Perform the "AFTER REPAIR
•
PROCEDURE".
4
(See AFTER REPAIR PROCEDURE .)
Are any DTCs present?
•
ACTION
Yes Go to the next step.
Record the FREEZE FRAME DATA on the
No
repair order, then go to the next step.
Perform repair or diagnosis according to the
available repair information.
Yes
If the vehicle is not repaired, go to the next
•
step.
No Go to the next step.
Replace the PCM, then go to the next step.
Yes
(See PCM REMOVAL/INSTALLATION .)
No Go to the next step.
Go to the applicable DTC inspection.
Yes
(See DTC TABLE .)
No DTC troubleshooting completed.
(w) Engine Diagnostics & Control
Page 392