Make sure to reconnect all disconnected
•
connectors.
Clear the DTC from the PCM memory
•
using the WDS or equivalent.
Perform the DRIVE MODE 1 and 3.
•
(See OBD-II DRIVE MODE .)
Is the PENDING CODE same as DTC
•
present?
VERIFY AFTER REPAIR PROCEDURE
Perform the "AFTER REPAIR
•
PROCEDURE".
11
(See AFTER REPAIR PROCEDURE .)
Are any DTCs present?
•
No Go to the next step.
Go to the applicable DTC inspection.
Yes
(See DTC TABLE .)
No DTC troubleshooting completed.
(w)
Engine Diagnostics & Control
Page 403