Volkswagen Passat 1995 Official Factory Repair Manual page 915

VAG 1551 Scan Tool (ST), connecting and selecting 'Engine Electronics' address word 01
http://ebahn.bentleypublishers.com/vw/servlet/Display?action=Goto&type=repair&id=VW...
VAG 1551 Scan Tool (ST),
connecting and selecting
"Engine Electronics" address
word 01
Special tools, testers and auxiliary items
VAG 1551/1552 scan tool with VAG 1551/3
adapter cable
Note:
The VAG 1552 scan tool can be used instead of
the VAG 1551 scan tool, however a print-out is
not possible.
Test conditions
Fuse 22 OK
Battery voltage at least 11 volts
Ground (GND) connections on engine and
transmission OK. (engine GND connection:
Page 24-3 , item 19 )
Work sequence
- Open cover for Data Link Connector (DLC).
- Connect VAG 1551/1552 scan tool with VAG
1551/3 adapter cable.
Depending upon desired function:
- Switch ignition on or start engine
Engine Control Module (ECM) functions table.
Page 1 of 80
01-7
Page 01
6/12/2004