MSD-701AMP User Guide
9.16.4 Command execution
Menu
Top→CONTROL COMMAND→EXECUTE CTRL COMMAND
Setting value
CMD 1 to CMD 32, COMMAND A to COMMAND I
You can execute registered control commands (COMMAND A to COMMAND I) that can also be executed by
specifying a command number (CMD 1 to CMD 32).
Only executable control commands are displayed.
Press the "MENU/ENTER" button to apply the setting.
COMMAND A to COMMAND F can be executed from front panel buttons.
9.16.5 Initializing registered command and link
Menu
Top→CONTROL COMMAND→INITIALIZATION
Setting value
CMD 1 to CMD32
RCV 1 to RCV32
POWER ON to AUDIO:OUT-OFF : Control command association
You can initialize the following commands and associations:
・ 9.16.1 Registering/Editing control command
・ 9.16.2 Registering/Editing reply command
・ 9.16.3 Command link
Press the "MENU/ENTER" button to apply the setting, and you will hear a long beep sound.
144
【See: 9.16.1 Registering/Editing control command】
: Control command
: Reply command