Command Execution; Invalid Duration At Control Command Execution; Initializing Registered Command And Link - IDK MSD-6203 User Manual

MSD-62 Series User's Guide

9.14.4 Command execution

Menu Top→PRESET COMMAND→COMMAND EXECUTION
Setting value CMD 1 to CMD 32, COMMAND A ～ COMMAND I
You can execute the registered control commands.
Only executable control commands are displayed.
Press the MENU/SET key to apply the setting.

9.14.5 Invalid duration at control command execution

Menu Top→PRESET COMMAND→INVALID TIME
Setting value 0s000ms to 999s999ms [Default] 0s000ms
You can set the waiting time from starting control command execution to receiving the next command. Use
this menu to prevent repeated execution caused by pressing the control command execution key twice.
The longer time either of control command execution time or the time set in this menu will be applied as the
invalid operation time. Only operations from ports that execute control commands will be invalid; operations
from other ports can be performed.
For example, if you execute a command from a command execution key, you cannot perform any operations
from command execution keys until the control command is completed. However, for DISPLAY POWER keys
and CHANNEL SELECTION keys, even during the invalid duration, control command from different outputs
can be executed.

9.14.6 Initializing registered command and link

Menu Top→PRESET COMMAND→INITIALIZE
Setting value CMD 1 to CMD 32: Control command
RCV 1 to RCV 32 : Reply command
POWER ON
You can initialize the following commands and associations:
▪
Control commands registered in "9.14.1 Registering/editing control command"
▪
Reply commands registered in "9.14.2 Registering / Editing reply command"
▪
Control command link "9.14.3 Command link"
Use this menu to delete or set them from the first step again.
You will hear a beep sound when the initialization is completed by pressing the MENU/SET key.
128
【See: 9.14.1 Registering/editing control command】
: Control command association