Configuring Vpls Components - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
4 Define mesh/spoke SDP's for the VPLS (optional)
5 Modify STP default parameters for the m-VPLS (optional).
6 Modify v-VPLS parameters such as user-to-user communication, mac learning
7 Modify IGMP snooping parameters for the v-VPLS instances and the VPLS
8 Enable the service.

5.8 Configuring VPLS Components

This section describes how to configure v-VPLS and m-VPLS entities, including CLI
command syntax and examples. For complete command and parameter
descriptions see also the sections
Reference"and
This section provides information about configuring the following entities:
•
•
•
•
•
5.8.1
Only one m-VPLS service is configured per ISAM, using the default customer ID 1.
Note that in the CLI syntax example, customer ID must be specified when creating
the service, but is optional when modifying an existing service.
configure service vpls <service-id> customer {1 | <customer-id>} {m-vpls - |
v-vpls <vlan-id>}
The following is an example of a basic m-VPLS configuration. Note that the
description can only be added and the admin state changed to up using the [no]
shutdown command, after the service is created.
*A:ALA-1>configure>service>vpls# info
----------------------------------------------
...
Issue: 13
•
Associate the service to an existing SDP
and aging, FDB database size (optional).
instances (optional).
"VPLS Service CLI Configuration
Creating a VPLS Service
Configuring Spanning Tree Protocols on m-VPLS
Configuring v-VPLS/VPLS parameters
Configuring VPLS SAPs
•
Configuring VPLS SAP Parameters
•
Configuring SAP-Specific STP Parameters
Configuring SDP Bindings
Creating a VPLS Service
m-vpls 1 customer 1 create
description "Local mVPLS"
stp
shutdown
3HH-11985-AAAA-TQZZA
"VPLS Service CLI Command
Commands".
Virtual Private LAN Service
189