Virtual Private LAN Service
*A:ALA-2>config>service# info
----------------------------------------------
...
----------------------------------------------
*A:ALA-2>config>service#
*A:ALA-3>config>service# info
----------------------------------------------
...
5.7 Configuration Workflow
This section provides a brief overview of the tasks that must be performed to
configure VPLS services and SAP and spoke/mesh SDPs, and describes the related
CLI command syntax.
For VPLS services:
1 Create the m-VPLS instance, a v-VPLS instance or a VPLS instance.
2 Add a service description (optional).
3 Define SAPs:
188
vpls 9000 customer 6 create
description "This is a distributed VPLS."
def-mesh-vc-id 750
stp
shutdown
exit
sap lt:1/1/5:16 create
description "VPLS SAP"
exit
spoke-sdp 2:22 create
exit
mesh-sdp 8:750 create
exit
no shutdown
exit
vpls 9000 customer 6 create
description "This is a distributed VPLS."
def-mesh-vc-id 750
stp
shutdown
exit
sap lt:1/1/3:33 create
description "VPLS SAP"
exit
spoke-sdp 2:22 create
exit
mesh-sdp 8:750 create
exit
no shutdown
exit
•
Select port(s) or LAGs.
•
Select v-VPLS/VPLS filter policies (optional).
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13