Table 520 Keepalive Command; Table 521 Local-Address Command; Keepalive - Nokia 7302 Manual

Virtual Private Routed Network Service
7.10.9.23
Table 520
7.10.9.24
Table 521
(1 of 2)
510

keepalive

keepalive command
Item Description
Syntax keepalive seconds
no keepalive
Context configure>service>vprn>bgp
configure>service>vprn>bgp>group
configure>service>vprn>bgp>group>neighbor
Description This command configures the BGP keepalive timer. A keepalive message is sent every time
this timer expires. The seconds parameter can be set at three levels: global level (applies to
all peers), group level (applies to all peers in peer-group) or neighbor level (only applies to
specified peer). The most specific value is used.
The keepalive value is generally one-third of the hold-time interval. Even though the OS
implementation allows the keepalive value and the hold-time interval to be independently set,
under the following circumstances, the configured keepalive value is overridden by the
hold-time value:
If the specified keepalive value is greater than the configured hold-time, then the specified
value is ignored, and the keepalive is set to one third of the current hold-time value.
If the specified hold-time interval is less than the configured keepalive value, then the keepalive
value is reset to one third of the specified hold-time interval.
If the hold-time interval is set to zero, then the configured value of the keepalive value is
ignored. This means that the connection with the peer is up permanently and no keepalive
packets are sent to the peer.
The no form of the command used at the global level reverts to the default value.
The no form of the command used at the group level reverts to the value defined at the global
level.
The no form of the command used at the neighbor level reverts to the value defined at the
group level.
Default 30 seconds
Parameters seconds — The keepalive timer in seconds, expressed as a decimal integer.
Values: 0 — 21845
local-address
local-address command
Item Description
Syntax local-address ip-address
no local-address
Context configure>service>vprn>bgp>group
configure>service>vprn>bgp>group>neighbor
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13