Table 601 Base Command; Table 602 Show Service-Id Base Output; Base - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
(2 of 2)
7.10.12.5
Table 601
Table
Table 602
Issue: 13
Label Description
Type Static — FDB entries created by management.
Learned — Dynamic entries created by the learning process.
OAM — Entries created by the OAM process.
Age The time elapsed since the service was enabled.
Interface The interface applied to the service.
Port The port where the SAP is applied.

base

base command
Item Description
Syntax base
Context show>service>id
Description This command displays basic information about this VPRN service.
602 describes the command output fields.
Show Service-ID Base Output
Label Description
Service Id The operating state of the service.
Vpn Id Specifies the VPN ID assigned to the service.
Service Type The type of service: Apipe, Cpipe, Epipe, Fpipe, IES, Ipipe, VPLS, VPRN.
Description Generic information about the service.
Customer Id The customer identifier.
Last Mgmt Change The date and time of the most recent management-initiated change to this customer.
Adm The desired state of the service.
Oper The service identifier.
Mtu The largest frame size (in octets) that the service can handle.
SAP Count The number of SAPs defined on the service.
Identifier Specifies the service access (SAP) points.
3HH-11985-AAAA-TQZZA
Virtual Private Routed Network Service
559