FD 100/320Gbps NT and FX NT IHub Services Guide
3.17.4.9
Table 25
3.17.4.10
Table 26
3.17.4.11
Table 27
(1 of 2)
Issue: 13
y1731pm
y1731pm command
Item
Description
Syntax
domain md-index association ma-index mep mep-id session session-id [create]
Context
configure>eth-cfm>y1731pm
Description
This command creates a y1731pm session for the given mep.
The no form of the command will remove the y1731pm session.
Parameters
domain – Connectivity Fault Management domain
association- Maintenance Association for the Domain
mep - CFM Maintenance Endpoint
session - creates a session for the given mep
shutdown
shutdown command
Item
Description
Syntax
shutdown
Context
configure>eth-cfm>y1731pm>domain
Description
Indicates the desired administrative state of the y1731pm session.
The no form of the command will admin enable the y1731pm session.
Default
Disabled
priority
priority command
Item
Description
Syntax
priority type
Context
configure>eth-cfm>y1731pm>domain
Description
The value of Priority specifies the priority used in the generated test frame for the Y1731 PM
(LM/DM/SLM) session.
This parameter can be set only when admin status is set to disabled.
The no form of the command reverts the value to the default.
3HH-11985-AAAA-TQZZA
Services Overview
91