Enabling And Disabling Vpls Entities - Nokia 7302 Manual

Virtual Private LAN Service
stp
shutdown
exit
sap lt:1/1/5:22 create
description "VPLS SAP"
exit
no shutdown
----------------------------------------------
*A:ALA-1>configure>service>vpls#
To display a list of services, use the show service service-using vpls command.
Enter the parameter such as description and/or SAP command syntax, and then
enter the new information.
To modify the range of VLANs on an access port that are to be managed by an
existing m-VPLS, first the new range should be entered and afterwards the old range
removed. If the old range is removed before a new range is defined, all customer
VPLS services in the old range will become unprotected and may be disabled. For
example:
configure>service# vpls service-id sap sap-id managed-vlan-list [no] range
vlan-range
5.9.2
You can administratively enable and disable the following VPLS without deleting the
service parameters.
•
•
•
When a VPLS is disabled, all associated user VPLS services are also disabled (to
prevent loops). If this is not desired, first un-manage the user's VPLS service by
removing them from the managed-vlan-list.
The shutdown command administratively enables or disables the following m-VPLS
or v-VPLS entities:
•
•
Unlike other commands and parameters where the default state will not be indicated
in the configuration file, shutdown and no shutdown are always indicated in system
generated configuration files.
configure service vpls <service-id> [no] shutdown
218

Enabling and Disabling VPLS Entities

v-VPLS or m-VPLS service.
SAPS configured for the m-VPLS or a v-VPLS instance.
STP instance configured in m-VPLS or an m-VPLS SAP
The no form of the shutdown command puts an entity into the administratively
enabled state.
The shutdown form of the command administratively disables an entity.
Administratively downing an entity changes the operational state of the entity to
down and the operational state of any entities contained within the
administratively down entity. Downing an entity does not change, reset, or remove
any configuration settings or statistics.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13