Table 466 Address Command; Table 467 Dhcp6-Relay Command; Table 468 Lease-Populate Command; Address (Ipv6) - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
7.10.6.2
Table 466
7.10.6.3
Table 467
7.10.6.4
Table 468
(1 of 2)
Issue: 13

address (ipv6)

address command
Item Description
Syntax address ipv6-address/prefix-length [eui-64]
no address ipv6-address/prefix-length
Context configure>service>vprn>interface>ipv6
Description This command assigns an IPv6 address to the VPRN interface.
Up to 254 global IPv6 addresses can be configured.
Parameters ipv6-address/prefix-length — Specifies the IPv6 address on the interface.
Values: ipv6-address/prefix: ipv6-address x:x:x:x:x:x:x:x (eight 16-bit pieces)
prefix-length
eui-64 — When the eui-64 keyword is specified, a complete IPv6 address from the supplied
prefix and 64-bit interface identifier is formed. The 64-bit interface identifier is derived from
MAC address on Ethernet interfaces. For interfaces without a MAC address, for example ATM
interfaces, the Base MAC address of the chassis is used.
dhcp6-relay
dhcp6-relay command
Item Description
Syntax [no] dhcp6-relay
Context configure>service>vprn>interface>ipv6
Description This command configures DHCPv6 relay parameters for the VPRN interface.
lease-populate
lease-populate command
Item Description
Syntax lease-populate [nbr-of-leases]
no lease-populate
3HH-11985-AAAA-TQZZA
Virtual Private Routed Network Service
x:x:x:x:x:x:d.d.d.d
x [0 — FFFF]H
d [0 — 255]D
1 — 64
483