Virtual Leased Line Services
4.6.5.14
Table 80
4.6.5.15
Table 81
140
low-priority-defect
low-priority-defect command
Item
Description
Syntax
low-priority-defect { allDef | macRemErrXcon | remErrXcon | errXcon | xcon | noXcon}
Context
configure>service>epipe>spoke-sdp>eth-cfm>mep
Description
This command specifies the lowest priority defect that is allowed to generate a fault alarm.
Default
macRemErrXcon
Parameters
allDef - DefRDICCM, DefMACstatus, DefRemoteCCM, DefErrorCCM and DefXconCCM
macRemErrXcon - DefMACstatus, DefRemoteCCM, DefErrorCCM and DefXconCCM
remErrXcon - DefRemoteCCM, DefErrorCCM and DefXconCCM
errXcon - DefErrorCCM and DefXconCCM
xcon - DefXconCCM
noXcon - No defects DefXcon or lower are to be reported
mac-address
mac-address command
Item
Description
Syntax
mac-address mac-address
no mac-address
Context
configure>service>epipe>spoke-sdp>eth-cfm>mep
Description
This command enables configuration of the MAC Address for the MEP.
Parameters
mac-address - The MAC address of the MEP in xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx format.
Value: xx:xx:xx:xx:xx:xx or xx-xx-xx-xx-xx-xx
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13