Table 297 Mesh-Sdp Command - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
(2 of 2)
5.16.9.11
Table 297
(1 of 2)
Issue: 13
Item Description
Parameters all - Clears the statistics for all SAPs.
sap sap-id — Specifies the physical port identifier portion of the SAP definition.
Values: {port-id | lag-id}:{vlanid | no-tag}
•
port-id
Specifies the physical port ID in the following format:
<port-id>: <nwport-id | ltport-id>
nwport-id - <slot-address>:<port-type>:<port-num>
— slot-address - nt|nt-a|nt-b|ntio-1
— port-type - sfp | xfp |vp | eth | ieee1588 | AI
— port-num - port-number
ltport-id - lt:<rack>/<shelf>/<slot>
— lt - keyword
— rack - number identifying the rack
— shelf - number identifying the shelf
— slot - number identifying the slot
•
lag-id
lag: keyword
id: 1 — 64
•
vlanid
Specifies the VLAN ID to be associated with the port identified by the SAP. For v-VPLS,
the SAP VLAN ID must match the VLAN ID defined at the v-VPLS level. The null value can
also be specified, to indicate that the SAP will send and receive untagged frames. If this
SAP is not defined, untagged frames will be dropped.
The m-VPLS VLAN ID is always specified as no-tag, which is reserved for untagged L2CP
frames processed to be by the m-VPLS.
Values:
m-VPLS vlanid: no-tag
v-VPLS vlanid: 0 | 1— 4093 (0 specifies untagged frames)
sdp - Clears only statistics associated with the specified SDP ID
sdp-id - The SDP ID for which to clear associated statistics.
Values: 1...17407
vc-id - The virtual circuit ID on the SDP ID for which to clear statistics.
Values: 1...4294967295
mesh-sdp
mesh-sdp command
Item Description
Syntax mesh-sdp sdp-id:[vc-id] ingress-vc-label
Context clear>service>id
Description This command clears the ingress VC label for the specified mesh SDP.
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
347