Table 150 Force-Vlan-Vc-Forwarding Command; Table 151 Force-Vlan-Vc-Forwarding Command; Table 152 Precedence Command; Force-Vlan-Vc-Forwarding - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
5.16.2.26
Table 150
5.16.2.27
Table 151
5.16.2.28
Table 152
(1 of 2)
Issue: 13

force-vlan-vc-forwarding

force-vlan-vc-forwarding command
Item Description
Syntax [no] force-vlan-vc-forwarding
Context configure>service>vpls>mesh-sdp
configure>service>vpls>spoke-sdp
configure>service>pw-template
Description This command forces vc-vlan-type forwarding in the data path for spoke/mesh SDPs which
have either vc-type. This command is not allowed on vlan-vc-type SDPs.
The no form of this command sets default behavior.
Default disabled
ignore-standby-signaling
force-vlan-vc-forwarding command
Item Description
Syntax [no] ignore-standby-signaling
Context configure>service>vpls>spoke-sdp
Description When this command is enabled, the node will ignore standby-bit received from TLDP peers for
the given spoke SDP and performs internal tasks withot taking it into account.
This command is present at endpoint level as well as spoke SDP level. If the spoke SDP is part
of the explicit-endpoint, it is not possible to change this setting at the spoke SDP level. The
existing spoke SDP will become part of the explicit-endpoint only if the setting is not conflicting.
The newly created spoke SDP which is a part of the given explicit-endpoint will inherit this
setting from the endpoint configuration.
Default enabled
precedence
precedence command
Item Description
Syntax precedence [precedence-value| primary ]
no precedence
Context configure>service>vpls>spoke-sdp
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
267