Summary - Nokia 7302 Manual

Virtual Private Routed Network Service
Table
Table 669
7.10.12.40
Table 670
Table
Table 671
(1 of 2)
602
669 describes the standard command output fields for the route table.
Show Route Table Standard Output
Label
IP Addr/mask
Pref
Metric
Type
Next Hop
Interface
Active
No. of Routes:

summary

summary command
Item Description
Syntax summary
Context show>router>dhcp
Description Display the status of the DHCP Relay and DHCP snooping functions on each interface.
671 describes the output fields for DHCP summary
Show DHCP Summary Output
Label
Interface Name
ARP Populate
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Description
The static route destination address and mask.
The route preference value for the static route.
The route metric value for the static route.
BH — The static route is a black hole route. The Nexthop for this type of route is
black-hole.
ID — The static route is an indirect route, where the nexthop for this type of route
is the non-directly connected next hop.
NH — The route is a static route with a directly connected next hop. The Nexthop
for this type of route is either the next hop IP address or an egress IP interface
name.
The next hop for the static route destination.
The egress IP interface name for the static route.
n/a — indicates there is no current egress interface because the static route is
inactive or a black hole route.
N — The static route is inactive; for example, the static route is disabled or the next
hop IP interface is down.
Y — The static route is active.
The number of routes displayed in the list.
Description
Name of the router interface.
Indicates whether or nor ARP populate is enabled.
Issue: 13