Table 172 Bgp-Ad Command; Table 173 Pw-Template-Bind Command; Bgp-Ad - Nokia 7302 Manual

Virtual Private LAN Service
(2 of 2)
5.16.2.47
Table 172
5.16.2.48
Table 173
(1 of 2)
278
Item Description
Description This command administratively enables/disables the local BGP VPLS instance. On
de-activation, an MP-UNREACH-NLRI must be sent for the local NLRI.
The no form of the command enales the BGP VPLS addressing and the related BGp
advertisement.
The associated BGP VPLS MP-REACH-NLRI will be advertised in an update message and the
corresponding received NLRIs must be considered to instantiate the data plane. RT and RD
usage is the same as in the BGP AD solution: if the values are not configured here, the value
of the VPLS-id from under the bgp-ad node is used. If VPLS-id value is not configured, the MH
site cannot be activated (that is, no shutdown returns an error). The same applies if a
PW-template is not specified under the bgp node.
Default shutdown

bgp-ad

bgp-ad command
Item Description
Syntax [no] bgp-ad
Context configure>service>vpls
Description This command configures BGP auto-discovery.
pw-template-bind
pw-template-bind command
Item Description
Syntax pw-template-bind policy-id [split-horizon-group group name]
no pw-template-bind policy-id
Context configure>service>vpls>bgp
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13