Table 535 Rapid-Withdrawal Command; Table 536 Remove-Private Command; Rapid-Withdrawal - Nokia 7302 Manual

Virtual Private Routed Network Service
7.10.9.38
Table 535
7.10.9.39
Table 536
520

rapid-withdrawal

rapid-withdrawal command
Item Description
Syntax [no] rapid-withdrawal
Context configure>service>vprn>bgp
Description This command disables the delay (Minimum Route Advertisement) on sending BGP
withdrawals. Normal route withdrawals may be delayed up to the mininum route advertisement
to allow for efficient packing of BGP updates.
The no form of the command removes this command from the configuration and returns
withdrawal processing to the normal behavior.
Default no rapid-withdrawal
remove-private
remove-private command
Item Description
Syntax [no] remove-private
Context configure>service>vprn>bgp
configure>service>vprn>bgp>group
configure>service>vprn>bgp>group>neighbor
Description This command allows private AS numbers to be removed from the AS path before advertising
them to BGP peers.
When the remove-private parameter is set at the global level, it applies to all peers regardless
of group or neighbor configuration. When the parameter is set at the group level, it applies to
all peers in the group regardless of the neighbor configuration.
The OS software recognizes the set of AS numbers that are defined by IANA as private. These
are AS numbers in the range 64512 through 65535, inclusive.
The no form of the command used at the global level reverts to default value.
The no form of the command used at the group level reverts to the value defined at the global
level.
The no form of the command used at the neighbor level reverts to the value defined at the
group level.
Default no remove-private — Private AS numbers will be included in the AS path attribute.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13