Common Configuration Tasks; Creating An Epipe Service; Configure Epipe Qos Attributes - Nokia 7302 Manual

Virtual Leased Line Services
4.4.1
This section provides a brief overview of the tasks that must be performed to
configure the VLL services and provides the CLI commands.
1 Associate the service with a customer ID.
2 Define SAP parameters
3 Define spoke SDP parameters.
4 Optionally configure QoS policies for the service and rate-limiting.
5 Enable the service.
4.4.2
Use the following CLI syntax to create an Epipe service.
configure>service# epipe service-id [customer customer-id]
The following displays an Epipe configuration example:
A:ALA-1>configure>service# info
-------------------------------------------
...
-------------------------------------------
A:ALA-1>configure>service#
4.4.2.1
Use the following CLI syntax to configure the Quality of Service attributes for the
Epipe service:
•
•
•
•
configure>service# epipe service-id [customer customer-id]
112

Common Configuration Tasks

Optional - associate egress and ingress filters (configured in configure>filter
context).

Creating an Epipe Service

description description-string
no shutdown
epipe 500 customer 5 create
description "ALU epipe service"
no shutdown
exit

Configure Epipe QoS Attributes

QoS policy for ingress access side (applicable to the SAP),
QoS policy for ingress network side and for egress network side (applicable to the
PW),
QoS policy for self-generated traffic,
rate limiter for egress side.
egress
rate-limit cir cir-rate pir pir-rate
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13