Table 411 Vprn Command; Global Commands - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
(2 of 2)
7.10.2
7.10.2.1
Table 411
(1 of 2)
Issue: 13
Item Description
Parameters description-string — The description character string. Allowed values are any string up to 160
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.

Global Commands

vprn
vprn command
Item Description
Syntax vprn service-id customer customer-id
no vprn service-id
Context configure>service
Description This command creates or edits a Virtual Private Routed Network (VPRN) service instance.
If the service-id does not exist, a context for the service is created. If the service-id exists, the
context for editing the service is entered.
VPRN services allow the creation of customer-facing IP interfaces in the same routing instance
used for service network core routing connectivity. VPRN services require that the IP
addressing scheme used by the subscriber must be unique between it and other addressing
schemes used by the provider and potentially the entire Internet.
IP interfaces defined within the context of an VPRN service ID must have a SAP created as the
access point to the subscriber network.
When a service is created, the customer keyword and customer-id must be specified and
associates the service with a customer. The customer-id must already exist having been
created using the customer command in the service context. When a service is created with
a customer association, it is not possible to edit the customer association. The service must be
deleted and re-created with a new customer association.
When a service is created, the use of the customer customer-id is optional to navigate into the
service configuration context. If attempting to edit a service with the incorrect customer-id
results in an error.
Multiple VPRN services are created to separate customer-owned IP interfaces. More than one
VPRN service can be created for a single customer ID. More than one IP interface can be
created within a single VPRN service ID. All IP interfaces created within an VPRN service ID
belongs to the same customer.
The no form of the command deletes the VPRN service instance with the specified service-id.
The service cannot be deleted until all the IP interfaces and all routing protocol configurations
defined within the service ID have been shutdown and deleted.
Default None — No VPRN service instances exist until they are explicitly created.
3HH-11985-AAAA-TQZZA
Virtual Private Routed Network Service
449