Table 262 Show Fdb Command Output Fields - Nokia 7302 Manual

Virtual Private LAN Service
(2 of 2)
Table
Table 262
324
Item Description
Parameters sap sap-id — Specifies the physical port identifier portion of the SAP definition.
Values: {port-id | lag-id}:{vlanid | no-tag}
•
port-id
Specifies the physical port ID in the following format:
<port-id>: <nwport-id | ltport-id>
nwport-id - <slot-address>:<port-type>:<port-num>
— slot-address - nt|nt-a|nt-b|ntio-1
— port-type - sfp | xfp |vp | eth | ieee1588 | AI
— port-num - port-number
ltport-id - lt:<rack>/<shelf>/<slot>
— lt - keyword
— rack - number identifying the rack
— shelf - number identifying the shelf
— slot - number identifying the slot
•
lag-id
lag: keyword
id: 1 — 64
•
vlanid
Specifies the VLAN ID to be associated with the port identified by the SAP. For v-VPLS,
the SAP VLAN ID must match the VLAN ID defined at the v-VPLS level. The null value
can also be specified, to indicate that the SAP will send and receive untagged frames. If
this SAP is not defined, untagged frames will be dropped.
Values:
v-VPLS vlanid: 0 | 1— 4093 (0 specifies untagged frames)
sdp sdp-id - The SDP ID for which to display FDB entries.
Values: 1...17407
mac ieee-address - Specifies the 48-bit MAC address. The MAC address can be expressed
in the form aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are
hexadecimal numbers.
detail - Displays detailed information.
expiry - Displays time until MAC is aged out.
262 describes the command output fields.
Show FDB Command Output Fields
Label Description
ServID Displays the service ID.
MAC Displays the associated MAC address.
Source-Identifier The location where the MAC is defined.
Type/Age Type - Specifies the number of seconds used to age out TLS FDB entries learned on
local SAPs.
These entries correspond to MAC addresses learned on remote SAPs.
Last Change Indicates the time of the most recent state changes.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13