Table 583 Export Command; Table 584 Import Command; Export - Nokia 7302 Manual

Virtual Private Routed Network Service
(2 of 2)
7.10.11.6
Table 583
7.10.11.7
Table 584
(1 of 2)
546
Item Description
Default split-horizon enabled

export

export command
Item Description
Syntax export policy-name [policy-name...]
no export
Context configure>service>vprn>rip
configure>service>vprn>rip>group
configure>service>vprn>rip>group>neighbor
Description This command specifies the export policies to be used to control routes advertised to RIP
neighbors. By default, RIP advertises routes from other RIP routes but does not advertise any
routes from other protocols unless directed by an export policy.
The no form of the command removes all policies from the configuration.
Default no export — No export route policies specified.
Parameters policy-name — The export route policy name. Allowed values are any string up to 32
characters long composed of printable, 7-bit ASCII characters. If the string contains special
characters (#, $, spaces, etc.), the entire string must be enclosed within double quotes.
The specified name(s) must already be defined.
import
import command
Item Description
Syntax import policy [policy...]
no import
Context configure>service>vprn>rip
configure>service>vprn>rip>group
configure>service>vprn>rip>group>neighbor
Description This command specifies the import policies to be used to control routes advertised from RIP
neighbors. By default, RIP accepts all routes from configured RIP neighbors. Import policies
can be used to limit or modify the routes accepted and their corresponding parameters and
metrics.
The no form of the command removes all route policy names from the import list.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13