Table 122 Description Command; Description - Nokia 7302 Manual

Virtual Private LAN Service
(2 of 2)
5.16.1.2
Table 122
(1 of 2)
250
Item

Description

Context configure>service>vpls
configure>service>vpls>interface
configure>service>vpls>mesh-sdp
configure>service>vpls>mesh-sdp>eth-cfm>mep
configure>service>vpls>egress>rate-limit-pbits
configure>service>vpls>sap
configure>service>vpls>sap>eth-cfm>mep
configure>service>vpls>sap>stp
configure>service>vpls>spoke-sdp
configure>service>vpls>spoke-sdp>eth-cfm>mep
configure>service>vpls>stp
Description The shutdown command administratively disables an entity. When disabled, an entity does
not change, reset, or remove any configuration settings or statistics. The operational state of
the entity is disabled as well as the operational state of any entities contained within. Many
objects must be shut down before they may be deleted.
The no form of this command places the entity into an administratively enabled state.
Services are created in the administratively down (shutdown) state. When a no shutdown
command is entered, the service becomes administratively up and then tries to enter the
operationally up state. Default administrative states for services and service entities is
described below in Special Cases.
•
Service Operational State
A v-VPLS is regarded as operational providing that one SAPs is operational.
•
SAP Operational State
A v-VPLS SAP is created on a port or a LAG, and belongs to the v-VPLS with the same
VLAN ID as defined for the SAP. The SAP is created in the administratively up default
state, and attempts to enter the operationally up state.
description
description command
Item Description
Syntax description description-string
no description
Context configure>service>vpls>endpoint
configure>service>vpls>interface
Description This command creates a text description stored in the configuration file for a configuration
context.
The description command associates a text string with a configuration context to help identify
the content in the configuration file.
The no form of this command removes the string from the configuration.
Default No description associated with the configuration context.
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13