Clear Commands; Spoke-Sdp; Table 105 Id Command; Table 106 Spoke-Sdp Command - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
(2 of 2)
4.6.7
4.6.7.1
Table 105
4.6.7.2
Table 106
(1 of 2)
Issue: 13
Label Description
Signaling Specifies the signaling protocol used to obtain the ingress and egress labels used in
frames transmitted and received on this SDP.
Admin State The administrative state of the Keepalive process.
Oper State The operational state of the Keepalive process.
I. Fwd. Pkts. Specifies the number of forwarded ingress packets.
I. Dro. Pkts Specifies the number of dropped ingress packets.
E. Fwd. Pkts. Specifies the number of forwarded egress packets.
E. Fwd. Octets Specifies the number of forwarded egress octets.
Associated LSP List A list of static LSPs used to reach the far-end router displays. All the LSPs in the list must
terminate at the IP address specified in the Far End field.

Clear Commands

id
id command
Item Description
Syntax id service-id
Context clear>service
clear>service>statistics
Description This command clears commands for a specific service.
Parameters service-id — The ID that uniquely identifies a service.

spoke-sdp

spoke-sdp command
Item Description
Syntax spoke-sdp sdp-id:vc-id ingress-vc-label
Context clear>service
Description This command clears and resets the spoke SDP bindings for the service.
3HH-11985-AAAA-TQZZA
Virtual Leased Line Services
155