Nokia 7302 Manual page 595

FD 100/320Gbps NT and FX NT IHub Services Guide
(2 of 2)
Table
Table 659
(1 of 2)
Issue: 13
Label
Opr
Primary IP
Send Mode
Recv Mode
Metric In
659 describes the detailed command output fields for a RIP group.
Show RIP Detailed Command Output
Label
Neighbor
Description
Primary IP
Group
Admin State
Oper State
Send Mode
Recv Mode
3HH-11985-AAAA-TQZZA
Description
Down — The RIP neighbor interface is operationally down.
Up — The RIP neighbor interface is operationally up.
The primary IP address of the RIP neighbor interface.
Bcast — Specifies that RIPv2 formatted messages are sent to the broadcast
address.
Mcast — Specifies that RIPv2 formatted messages are sent to the multicast
address.
None — Specifies that no RIP messages are sent (i.e., silent listener).
RIPv1 — Specifies that RIPv1 formatted messages are sent to the broadcast
address.
Both — Specifies that RIP updates in either version 1 or version 2 format will be
accepted.
None — Specifies that RIP updates will not be accepted.
RIPv1 — Specifies that RIP updates in version 1 format only will be accepted.
RIPv2 — Specifies that RIP updates in version 2 format only will be accepted.
The metric added to routes received from a RIP neighbor.
Description
The RIP neighbor name.
The RIP neighbor description. No Description Available indicates no description is
configured.
The RIP neighbor interface primary IP address.
The RIP group name of the neighbor interface.
Down — The RIP neighbor interface is administratively down.
Up — The RIP neighbor interface is administratively up.
Down — The RIP neighbor interface is operationally down.
Up — The RIP neighbor interface is operationally up.
Bcast — Specifies that RIPv2 formatted messages are sent to the broadcast
address.
Mcast — Specifies that RIPv2 formatted messages are sent to the multicast
address.
None — Specifies that no RIP messages are sent (i.e., silent listener).
RIPv1 — Specifies that RIPv1 formatted messages are sent to the broadcast
address.
Both — Specifies that RIP updates in either version 1 or version 2 format will be
accepted.
None — Specifies that RIP updates will not be accepted.
RIPv1 — Specifies that RIP updates in version 1 format only will be accepted.
RIPv2 — Specifies that RIP updates in version 2 format only will be accepted.
Virtual Private Routed Network Service
595