Table 290 Sap Command; Table 291 Counters Command; Counters - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
5.16.9.4
Table 290
5.16.9.5
Table 291
Issue: 13
sap
sap command
Item Description
Syntax sap sap-id
Context clear>service>statistics
Description This command displays IGMP snooping statistics for the v-VPLS service.
Parameters sap sap-id — Specifies the physical port identifier portion of the SAP definition.
Values: {port-id | lag-id}:{vlanid | no-tag}
•
port-id
Specifies the physical port ID in the following format:
<port-id>: <nwport-id | ltport-id>
nwport-id - <slot-address>:<port-type>:<port-num>
— slot-address - nt|nt-a|nt-b|ntio-1
— port-type - sfp | xfp |vp | eth | ieee1588 | AI
— port-num - port-number
ltport-id - lt:<rack>/<shelf>/<slot>
— lt - keyword
— rack - number identifying the rack
— shelf - number identifying the shelf
— slot - number identifying the slot
•
lag-id
lag: keyword
id: 1 — 64
•
vlanid
Specifies the VLAN ID to be associated with the port identified by the SAP. For v-VPLS,
the SAP VLAN ID must match the VLAN ID defined at the v-VPLS level. The null value can
also be specified, to indicate that the SAP will send and receive untagged frames. If this
SAP is not defined, untagged frames will be dropped.
The m-VPLS VLAN ID is always specified as no-tag, which is reserved for untagged L2CP
frames processed to be by the m-VPLS.
Values:
m-VPLS vlanid: no-tag
v-VPLS vlanid: 0 | 1— 4093 (0 specifies untagged frames)

counters

counters command
Item Description
Syntax counters
Context clear>service>statistics>id
Description This command clears all traffic queue counters associated with the service ID.
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
343