Installing And Replacing Components Other Than Network Interface Cards (Nics) And Accelerated Data Path (Adp) Services Modules - Nokia IP560 - Hard Disk Drive Based Installation Manual

7
Installing and Replacing Components
Other than Network Interface Cards
(NICs) and Accelerated Data Path
(ADP) Services Modules
This chapter provides information about how to install or replace orderable parts other than
network interface cards (NICs) and Accelerated Data Path (ADP) services modules in your
Nokia IP560 appliance. The following topics are covered:
Replacing the Compact Flash Memory Card
Installing a PC Card
Installing or Replacing a Hard-Disk Drive
Configuring a Hard-Disk Drive for Logging
Replacing or Upgrading Memory
Replacing a Nokia Encryption Accelerator Card
Replacing a Fan Unit
Replacing a Power Supply
Replacing the Battery
For information about how to add or replace NICs, see
Network Interface Cards."
For information about how to add or replace Accelerated Data Path (ADP) services modules, see
Chapter 6, "Installing, Using, and Replacing ADP Services Modules."
You should have a working knowledge of networking equipment before you attempt to service
an IP560 appliance. Limit service of the appliance to the procedures described in this chapter.
Note
To protect the IP560 appliance and the memory modules from electrostatic discharge
damage, make sure you are properly grounded before you touch these components. Use a
grounding wrist strap and follow the instructions provided with the wrist strap before you
handle the components or open the appliance.
IP560 Security Platform Installation Guide
Chapter 4, "Installing and Replacing
83