Table 580 Authentication-Type Command - Nokia 7302 Manual

Virtual Private Routed Network Service
(2 of 2)
7.10.11.3
Table 580
544
Item Description
Context configure>service>vprn>rip
configure>service>vprn>rip>group
configure>service>vprn>rip>group>neighbor
Description This command sets the authentication password to be passed between RIP neighbors.
The authentication type and authentication key must match exactly for the RIP message to be
considered authentic and processed.
The no form of the command removes the authentication password from the configuration and
disables authentication.
Default Authentication is disabled and the authentication password is empty.
Parameters authentication-key — The authentication key. The key can be any combination of ASCII
characters up to 255 characters in length (unencrypted). If spaces are used in the string,
enclose the entire string in quotation marks (" ").
hash-key — The hash key. The key can be any combination of ASCII characters up to 3452
characters in length (encrypted). If spaces are used in the string, enclose the entire string in
quotation marks (" ").
This is useful when a user must configure the parameter, but, for security purposes, the actual
unencrypted key value is not provided.
hash2 — Specifies the key is entered in a more complex encrypted form. If the hash2
parameter is not used, the unencrypted form is assumed.
authentication-type
authentication-type command
Item Description
Syntax authentication-type {none | password | message-digest | message-digest-long}
no authentication-type
Context configure>service>vprn>rip
configure>service>vprn>rip>group
configure>service>vprn>rip>group>neighbor
Description This command defines the type of authentication to be used between RIP neighbors. The type
and password must match exactly for the RIP message to be considered authentic and
processed.
The no form of the command removes the authentication type from the configuration and
effectively disables authentication.
Default no authentication-type — No authentication is enabled on an interface.
Parameters none — No authentication is used.
password — A simple clear-text password is sent.
message-digest — MD5 authentication is used.
message-digest-long — ????
3HH-11985-AAAA-TQZZA
FD 100/320Gbps NT and FX NT IHub Services Guide
Issue: 13