Table 252 Fdb-Mac Command; Table 253 Show Fdb-Mac Command Output Fields; Table 254 Sap-Using Command; Fdb-Mac - Nokia 7302 Manual

FD 100/320Gbps NT and FX NT IHub Services Guide
5.16.7.2
Table 252
Table
Table 253
5.16.7.3
Table 254
(1 of 2)
Issue: 13

fdb-mac

fdb-mac command
Item Description
Syntax fdb-mac ieee-address [expiry]
Context show>service
Description This command displays the FDB entry for a given MAC address.
Parameters ieee-address - The 48-bit MAC address for which to display the FDB entry in the form
aa:bb:cc:dd:ee:ff or aa-bb-cc-dd-ee-ff where aa, bb, cc, dd, ee and ff are hexadecimal
numbers.
expiry - Shows the time until the MAC is aged out.
253 describes the command output fields.
Show FDB-MAC Command Output Fields
Label Description
Service Id The service ID number.
MAC The specified MAC address.
Source-Identifier The location where the MAC is defined.
Type/Age Static - FDB entries created by management.
Learned - Dynamic entries created by the learning process.
OAM - Entries created by the OAM process.
H - Host
D or DHCP - DHCP-installed MAC.
sap-using
sap-using command
Item Description
Syntax sap-using [sap sap-id]
sap-using interface ip-address | ip-int-name
Context show>service
Description This command displays SAP information for the specified IP parameters.
If no optional parameters are specified, the command displays a summary of all defined SAPs.
The optional parameters restrict output to only SAPs matching the specified properties.
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
319