FD 100/320Gbps NT and FX NT IHub Services Guide
5.16.3.7
Table 189
5.16.3.8
Table 190
5.16.3.9
Table 191
(1 of 2)
Issue: 13
link-type
link-type command
Item
Description
Syntax
link-type {pt-pt | shared}
no link-type
Context
configure>service>vpls>sap>stp
Description
This command instructs STP on the maximum number of bridges behind this SAP. If there is
only a single bridge, transitioning to forwarding state will be based on handshaking (fast
transitions). If more than two bridges are connected via a shared media, their SAP should all
be configured as shared, and timer-based transitions are used.
The no form of this command returns the link type to the default value.
Default
pt-pt
mst-instance
mst-instance command
Item
Description
Syntax
mst-instance mst-inst-number
Context
configure>service>vpls>sap>stp
Description
This command enables the context to configure MSTI related parameters at SAP level. This
context can be open only for existing mst-instances defined at the service level (see
mst-instance).
Default
None
Parameters
mst-inst-number — Specifies an existing Multiple Spanning Tree Instance number.
Values: 1 — 4093
mst-path-cost
mst-path-cost command
Item
Description
Syntax
mst-path-cost inst-path-cost
no mst-path-cost
Context
configure>service>vpls>sap>stp>mst-instance
3HH-11985-AAAA-TQZZA
Virtual Private LAN Service
287